Compex Wireless-G Internet Router NP25G 6C Especificaciones descargar pdf (Pagina 32)

Page 27

Configure the Advanced WLAN

Settings

Follow these steps to change the radio settings of the router.

1. Click on WLAN Setup from the

CONFIGURATION menu.

2. Select Advanced.

1. Set the Beacon Interval (the time

lapse between every beacon sent)

to any value between 20 and 1000.

It is preset as 100 seconds.

2. Set the Data Beacon Rate from 1 to

16384.

This determines how often the

beacon should contain a Delivery

Traffic Indication Message (DTIM)

that tells power-save clients that a

packet is waiting for them. Is it preset

to 1.

3. Set the RTS/CTS Threshold from 256 to

2346.

It is preset to 2346.

4. Set the Frag Threshold from 256 to

2346.

It is preset to 2346.

5. Transmission Power Control (TPC)

offers the flexibility to set the Transmit

Power. (802.11h compliant)

It is set to Maximum by default, but

should be reduced if there is more

than one unit using the same

channel frequency.

It can be set from Minimum to

Maximum, 1dBm to 20dBm, in

increments or 1dBm per step.

1. Click Apply.

Changes will be enabled after reboot.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 109 110

Sin comentarios

Compex Wireless-G Internet Router NP25G 6C Especificaciones Pagina 32