Compex Wireless-G Internet Router NP25G 6C Especificaciones descargar pdf (Pagina 60)

Page 55

Configure Static Routing

The router allows the network administrator to add a static routing entry

into its routing table so that the router can re-route IP packets to

another network router. This feature is very useful for a network with

more than one router.

The diagram below illustrates a case in which you have two routers in

the network. One router is used for broadband Internet sharing while

another router connects to a remote office. You may then define a

static routing entry in the router to re-route the packets to the remote

office.

In this network, the main office of subnet 192.168.168.0 contains two

routers: the office is connected to the Internet via the router

(192.168.168.1) and to the remote office via Router A (192.168.168.254).

The remote office resides on a subnet 192.168.100.0.

You may add a static routing entry into the router’s routing tables so

that IP packets from the clients in the main office with a destination IP

address of 192.168.100.X (where X is any number from 2 to 254) will be

routed to the Router B, which acts as the gateway to that subnet.

Important: You do NOT need to set any routing

information if you are simply configuring the

router for broadband Internet sharing. Imprope

routing configuration will cause undesired effect.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 109 110

Sin comentarios

Compex Wireless-G Internet Router NP25G 6C Especificaciones Pagina 60